Parts

Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.

Replacement spindle spacers for Race Face X-Type XC/AM cranksets.

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

- Routes cables underneath the bottom bracket - Will not rust or corrode

- Steel cable noodle with alloy end caps - Includes plastic liner

The Enduro contact silicone seal is the same new universal face seal that comes with Enduro TorqTite Solid-Lube bottom brackets for SRAM DUB cranksets - Contact face seal seals directly to the bearing OD to make it a more universal fit - Apply a thin film of grease on the back side of the seal for optimum seal performance

FSA Mega Exo Small Parts.

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

Shimano Dura-Ace R9100 Cassette Spacers

Zipp Speed Weaponry Bolt Kits

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings

Dimension Basic Track Cog Lockring with 1.29-inch x 24 tpi left-hand thread. - Stainless steel - Fits all but Campagnolo and Miche hubs - Not compatible with Phil Wood hubs

Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Compatible with Mountain and Road for Shimano/SRAM - Lead-free PVC housing - Enough cable and housing for one brake - Black

Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

Replacement spindle spacers for Race Face X-Type FR/DH cranksets.

Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer). - Length: 4.4-inch - Diameter: 1.6-inch - Material: Plastic (Thermalite) - Weight: 0.8- ounce each - Replacement sleeve only - Sold individually

FSA Service Parts for BB30 Frames

FSA Service Parts for BB30 Frames

Flat Mount Disc Caliper Bracket Bolts

SRAM's Handlebar End Plugs are just the thing for adding a fun, custom touch to your handlebar taping job. They feature SRAM's famous and stylish "Make the Leap" frog logo.

SRAM's Handlebar End Plugs are just the thing for adding a fun, custom touch to your handlebar taping job. They feature SRAM's famous and stylish S logo.

M8 Capless Crank Arm Bolt Kit - For square-taper & Powerspline

Customize your ride with SRAM bar end plugs.

- Front or rear brake - MTB specific - 1.5mm stainless cable